CAREpoint 3
CAREpoint 2
- Quick Guide 0003 – Setting the Date and Time
- Quick Guide 0004 – Changing the Alarm Volume and Schedule
- Quick Guide 0005 – Setting a Resource to Alarm and Changing the Alarm Sound
- Quick Guide 0006 – Changing Autodial Settings
- Quick Guide 0007 – Cleaning the Fan Filter and Clearing the PM Message
- Quick Guide 0008 – Rebooting the CAREpoint 2
- Quick Guide 0009 – Shutting Down the CAREpoint 2
- Quick Guide 0010 – Shutting Down and Restarting the CAREpoint 2 User Interface
- Quick Guide 0011 – Installing a Printer
- Quick Guide 0012 – Adjusting the Transmit and Receive Levels
- Quick Guide 0013 – Shutting Down and Restarting the Host Program
- Quick Guide 0014 – Configuring the ECG Print/Send Option
- Quick Guide 0015 – Temporary Removal of the D-Scribe CD
- Quick Guide 0021 – Exporting Calls in D-Scribe
- Quick Guide 0023 – Synchronizing Time to Another Workstation
- Quick Guide 0024 – Setting a PIN Code for CAREpoint 2 # Codes
- Quick Guide 0031 – Overhead Page / Acknowledge Configuration
- Quick Guide 0032 – Using D-Scribe Reports
- Quick Guide Video 0004 – Changing the Alarm Volume and Schedule (Low Resolution)
- Quick Guide Video 0004 – Changing the Alarm Volume and Schedule (High Resolution)
- Quick Guide Video 0005 – Setting a Resource to Alarm and Changing the Alarm Sound (Low Resolution)
- Quick Guide Video 0005 – Setting a Resource to Alarm and Changing the Alarm Sound (High Resolution)
- Quick Guide Video 0007 – Cleaning the Fan Filter and Clearing the PM Message (Low Resolution)
- Quick Guide Video 0007 – Cleaning the Fan Filter and Clearing the PM Message (High Resolution)
- Pre-Installation Requirements (Compliments Pre-Installation Checklist)
- Network Frequently Asked Questions (Compliments Pre-Installation Checklist)
- TCP/UDP Ports Used by CAREpoint 2 (Compliments Network Frequently Asked Questions)
- Pre-Installation Checklist
- Installation Checklist
- CAREpoint 2 End User Training Guide (This is a subset of the CAREpoint 2 User’s Manual)
- D-Scribe User’s Manual
- Anti-virus Settings and Exclusions
- Applying the Power On/Off Label for Winsystems PC Modules
- Changing Radio Card Settings (2/4-wire)
- Changing the Registration Key for F-Protect Anti-Virus Software
- Checking CAREpoint 2 Automatic Updates Status
- Clearing Software Registration Message
- Configuring Windows Update Settings
- Installing an Expansion Module
- Sync Time to a Time Server
- TCP/UDP Ports Used by CAREpoint 2
- Uninstalling F-Protect Anti-virus Software
- Service Bulletin 005 – Converting a TR Card From Radio to Phone
- Service Bulletin 006 – Converting a TR Card From Phone to Radio
- Service Bulletin 007 – Swapping a PC Module and/or Power Supply (Advantech Motherboard)
- Service Bulletin 007 – Swapping a PC Module and/or Power Supply (Winsystems Motherboard)
- Service Bulletin 008 – Swapping a TR/OPIC Card
- Service Bulletin 009 – Swapping the Touch Screen Monitor (EETI Driver)
- Service Bulletin 009 – Swapping the Touch Screen Monitor (Gunze Driver)
- Service Bulletin 017 – Installing an External CD-ROM Drive
- Service Bulletin 018 – Installing CAREpoint 2 Handset Bracket
- Service Bulletin 019 – Installing a New PTT Switch
- Service Bulletin 020 – Swapping a Handset
- Service Bulletin 021 – Swapping an Expansion Module Power Supply
- Service Bulletin 022 – Installing an External USB Ethernet Adapter
- Service Bulletin 024 – Swapping a CD/DVD Rom Drive (Winsystems PC Modules Only)